|
Description |
Rhenus Norplex AFS are aluminium complex greases based on synthetic oils with EP-additives and white solid lubricants. |
|
Application and Properties |
Rhenus Norplex AFS are suitable for lubrication of high loaded machinery in the food, cosmetic and pharmaceutical industry in a wide temperature range.
Rhenus Norplex AFS are good pumpable in central lubrication systems and very good water resistant. All raw materials are physiologically harmless. Rhenus Norplex AFS are in accordance with the FDA-Guidelines 21 CFR 178.3570 and shall be used where a direct contact with the lubricant cannot be excluded. Excessive lubrication, which may cause food contact, shall be avoided. Rhenus Norplex AFS are registered by NSF (National Sanitary Foundation) category code H1. Advantages: |
Technical Data
| AFS 00 | AFS 0 | AFS 2 | ||
| Thickener | Al-Complex | Al-Complex | Al-Complex | |
| Operating temperature for long-term lubrication | -45 to +160℃ | -45 to +160℃ | -45 to +160℃ | |
| Short time admissible temperature peak value | +200℃ | +200℃ | +200℃ | |
| Permanent temperatures above 160℃, require regreasi ng at shorter intervals subject to thermal load. | ||||
| Drop point | ASTM D 2265 | > 250℃ | > 250℃ | > 250℃ |
| Worked penetration after 60 strokes | ASTM D 217 | 400-430 1/10mm | 355-385 1/10mm | 265-295 1/10mm |
| Type of base oil | synthetic | synthetic | synthetic | |
| Base oil viscosity at 40℃ | ASTM D 445 | 350 mm²/s | 350 mm²/s | 350 mm²/s |
| Water resistance | DIN 51 807-1 | 0 – 90 | 0 - 90 | 0 - 90 |
| SKF Emcor Test | IP 220/85 | Corrosion degree 0/0 | Corrosion degree 0/0 | Corrosion degree 0/0 |
| Designation | DIN 51 502 | GPFHC 00 P-40 | KPFHC 0 P-40 | KPFHC 2 P-40 |
 |
|||||||||||||||
|
