RHENUS FOOD GRADE GREASES

Rhenus Noran HTS 2

Content：

Rhenus Noran HTS 2
Synthetic High Temperature EP Grease – NLGI-Grade 2

Description

Rhenus Noran HTS 2 is a high temperature polytetrafluor ethylene concentrate grease on synthetic oil base.

Application
and
Properties

Rhenus Noran HTS 2 is a high temperature, thermally stable, synthetic lubricant for all purposes where grease on mineral oil base and common synthetically greases including silicone greases are not obtaining satisfactory results.

Rhenus Noran HTS 2 is water resistant and not affected by aggressive products and almost any solvent.

Rhenus Noran HTS 2 is not miscible with other greases neither on mineral oil, nor on synthetic base. The points to be lubricated should, therefore, be cleaned thoroughly before applying the grease.

Rhenus Noran HTS 2 has been authorised by BAM for use in tools and fittings for oxygen(up to 60°C at a maximum pressure of 100 bar).

Rhenus Noran HTS 2 is registered by NSF (National Sanitary Foundation) category code H1

Advantages:
high stability
very high thermal resistance
extremely resistant to oxidation
water resistant
resistant to aggressive products and almost any solvents
adherence capability
good adhesiveness

Technical Data

Thickener		PTFE
Operating temperature for long-term lubrication		-40 to +260℃
Short time admissible temperature peak value		+290℃
Drop point	ASTM D 2265	Not dropping
Worked penetration after 60 strokes	ASTM D 217	265 to 295 1/10 mm
Type of base oil		Synthetic oil
Base oil viscosity at 40℃	ASTM D 445	500 mm²/s
Water resistance	DIN 51 807 T1	0 – 90
Designation	DIN 51 502	KFK 2 U-40

Subject to modification of the technical data. Please refer to the material safety data sheet for additional information or contact our application engineers.