Content：
ArChine Hydratek FPH 5
Food Grade Synthetic PAO Hydraulic Oil
GENERAL
ArChine Hydratek FPH 5 is specially formulated to provide superior lubrication in food plant machinery. The polyapphaolefin (PAO) synthetic hydrocarbon oil provides outstanding anti-wear protection, which is compounded to prevent rusting in the presence of moisture, non-foaming and has characteristic of rapid water separation. An effective antioxidant offers long service life and reduces the possibility of sludge and varnish formation.
ArChine Hydratek FPH 5 can be used in where hydraulic fluids and other mild lubricants are called for in equipment associated with food processing. USDA/NSF has approved ArChine Hydratek FPH 5 under their H-1 specification for incidental contact with food.
The oil complies with FDA guidelines for food contact listed in CFR Title 21 Part 178, Section 178.3570.
FEATURES
￭ Good lubrication at high and low temperatures
￭ Compatibility with mineral oils and equipment designed for use with mineral oils
￭ Excellent antiwear and extreme pressure properties
￭ Superior Oxidation Resistance
￭ Non-Foaming
￭ Very Good Multi-metal Compatibility
￭ Meets a Wide Range of Equipment Requirements
￭ Controlled Demulsibility
Applications
￭ Systems employing multi-metal designs in pumps and other system components
￭ High pressure vane, piston and gear pumps
￭ Systems where very high operating temperatures are typical
￭ Where small amounts of water are unavoidable
￭ In systems containing gears and bearings
￭ Systems requiring a high degree of load-carrying capability and anti-wear protection
￭ Applications where thin oil-film corrosion protection is an asset such as in systems containing moisture
￭ Resists fling-off and remains on the chain for maximum lubrication and protection
ArChine Hydratek FPH 5 meets the flowing standards:
ISO 11158 (HV); DIN 51524, p.1, p.2 and p.3 (HL, HLP, HVLP); US Steel 127 and 136; ISO 12925 (CKB, CKC); DIN 51517, p.1, and p.2 (C, CL); AGMA 9005-E02 (RO, EP); David Brown S1.53.106
TYPICAL PROPERTIES*
| ISO Grade | 5 |
| Apperance | Light yellow transparent liquid |
| Density@20℃, g/cm3 | 0.810 |
| Viscosity@40℃, mm2/s | 6.23 |
| Viscosity@100℃, mm2/s | 1.91 |
| Viscosity Index | ------ |
| Flash Point (open cup, ℃) | 156 |
| Fire Point, ℃ | 172 |
| Pour Point, ℃ | -60 |
| Foaming 24℃, 93.5℃, after 24℃ | 20/0 10/0 20/0 |
| Copper corrosion, 100℃/3hr, grade | 1 |
*Typical data shall not be used as product specifications.
