Content：
r.grea Norlith LIC 2
Lithium-Calcium EP-Grease – NLGI-Grade 2
|
Description |
r.grea Norlith LIC 2 / Rhenus Norlith LIC 2 is a high performance EP grease based on high quality mineral oil. |
|
Application
and
Properties
|
r.grea Norlith LIC 2 / Rhenus Norlith LIC 2 suits for lubrication of roller and friction bearings under normal and extreme pressure load, especially for lubrication fittings, which are exposed to high and partly jerky loads as well as the influence of humidity.
Advantages:
good pumpable in central lubricating systems
extremely resistant to oxidation
water resistant
high stability
corrosion resistant
high pressure load capacity
good adhesiveness |
|
Technical Data
|
| Thickener |
|
Lithium-Calcium-Soap |
| Operating temperature for long-term lubrication |
|
-30 to +130℃ |
| Short time admissible temperature peak value |
|
+140℃ |
| Permanent temperatures above 130℃ require re-greasing at shorter intervals subject to thermal load |
| Drop point |
ASTM D 2265 |
> 170℃ |
| Worked penetration after 60 strokes |
ASTM D 217 |
265 to 295 1/10 mm |
| Penetration loss after 100 000 strokes |
ASTM D 217 |
< 20 1/10 mm |
| Flow pressure |
DIN 51 805 |
-30℃ / 1300 mbar |
| Type of base oil |
|
Mineral oil |
| Base oil viscosity at 40℃ |
ASTM D 445 |
220 mm²/s |
| Water resistance |
DIN 51 807-01 |
0 – 90 |
| SKF Emcor Test |
IP 220/85 |
Corrosion degree 0/0 |
| Copper Strip Test |
ASTM D 4048 |
Corrosion degree 1 – 130 |
| FAG-FE9 - Test |
DIN 51821-02-A/
1500/6000-130 |
F50 = 150 h |
| FAG-FE8 - Test, 536048 taper roller bearing |
E DIN 51 819-02- C-3000/10-120 |
mw = 25 mg |
| Timken Test, well load |
ASTM D 2509 |
40 lbs (178 N) |
| 4 ball Test, welding load |
DIN 51 350 |
3000 N |
| Designation |
DIN 51 502 |
KP 2 K-30 |
Subject to modification of the technical data. Please refer to the material safety data sheet for additional information or contact our application engineers. |
