Content：
r.grea Norlith PMO 2
Lithium EP Grease with MoS2 – NLGI-Grade 2
|
Description |
r.grea Norlith PMO 2 / Rhenus Norlith PMO 2 is a high performance EP grease on non-ageing mineral oil base formulated with molybdenum disulphides. |
|
Application
and
Properties
|
r.grea Norlith PMO 2 / Rhenus Norlith PMO 2 is suitable for lubrication of roller and friction bearings under extreme pressure load.
Molybdenum disulphides reduce friction and wear under temperature and pressure load.
r.grea Norlith PMO 2 / Rhenus Norlith PMO 2 also helps to smoothen new high loaded bearings. |
|
Application examples
|
Lubrication of high loaded bearings (e.g. pivoting bearings, pins, shafts, joints on trucks) threaded spindles and guides of lifting units.
Advantages:
non-ageing
high stability
water resistant
corrosion resistant
high pressure load capacity
good adhesiveness |
|
Technical Data
|
| Thickener |
|
Lithium-Soap |
| Operating temperature for long-term lubrication |
|
-30 to +130℃ |
| Short time admissible temperature peak value |
|
+140℃ |
| Permanent temperatures above 130℃ require re-greasing at shorter intervals subject to thermal load |
| Drop point |
ASTM D 2265 |
190℃ |
| Worked penetration after 60 strokes |
ASTM D 217 |
265 to 295 1/10 mm |
| Penetration loss after 100000 strokes |
ASTM D 217 |
< 30 1/10 mm |
| Type base oil |
|
Mineral oil |
| Base oil viscosity at 40℃ |
ASTM D 445 |
195 mm²/s |
| Water resistance |
DIN 51 807- 01 |
1 – 90 |
| SKF Emcor Test |
IP 220/85 |
Corrosion degree 0/0 |
| Copper Strip Test |
ASTM D 4048 |
Corrosion degree 1 – 120 |
| FAG-FE9 - Test |
DIN 51821-02-A/1500/6000-130 |
F50 > 100h |
| SKF-R2F - Test at 120℃ |
|
Passed |
| Timken Test, well load |
ASTM D 2509 |
50 lbs (222,5 N) |
| Designation |
DIN 51 502 |
KPF 2 K-30 |
Subject to modification of the technical data. Please refer to the material safety data sheet for additional information or contact our application engineers. |
