RHENUS METALWORKING OILS

r.form SE 5

Content：

r.form SE 5
evaporating stamping oil, low viscosity free of chlorine

Application

r.form SE 5 / Rhenus Rotanor CYC is a clear, low odour stamping oil, free of chlorine and aromatics.

r.form SE 5 / Rhenus Rotanor CYC is used for stamping of thin steel plates, i.e. for transformer and electric motors.

The thin lubricating film of this special oil evaporates within a short time. Hence the sheets cannot stick together and do not slide during assembly.

Due to the evaporation effect, a high cooling effect is achieved within the cutting area. r.form SE 5 / Rhenus Rotanor CYC incorporates polar additives providing good wettability and a good lubricity within the cutting area.

Technical Data

Viscosity 40℃ (mm²/s)	Density 20℃ (g/ml)	Flashpoint (℃)	Evaporation rate	Copper corrosion grade
1,7	0,76	>55	approx. 82	1

Remarks

Non-ferrous metals are not discoloured by r.form SE 5 / Rhenus Rotanor CYC.

Subject to modification of the technical data. Please refer to the material safety data sheet for additional information or contact our application engineers.